How To Replace Blower Motor on Ford Expedition and Lincoln Navigator?

The procedure is similar for both ford and Lincoln car models:-----

Blower Motor

REMOVAL & INSTALLATION Details are as follows:---

1. Before servicing the vehicle, refer to the precautions section.
2. On Expedition & Navigator models, remove the RH quarter trim panel.
3. Disconnect the blower motor electrical connector.
4. Remove the screws, then remove the blower motor.
5. On Expedition & Navigator models remove the wheel from the blower motor, as follows:
   1. Remove the push clip.
   2. Remove the wheel.
6. Installation is the reverse of the removal procedure. Use a new push clip to install the wheel onto the blower motor. 
   
   
   
   Fig. Removing the blower motor

These details will help.

Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html