Acura Rear Suspension Coil Spring Removal?

Coil Spring
REMOVAL & INSTALLATION

The details are as follows :----

1. Before servicing the vehicle, refer to the precautions section.
2. Support the vehicle under the lower control arm.
3. Remove or disconnect the following:
   
   
   Rear wheel

   Stabilizer link from the lower arm

   Wheel speed sensor wiring harness from the lower arm. Do not disconnect the connector.

   Upper shock absorber flange bolt

   Lower control arm bolts
4. Lower the floor jack and remove the coil spring and spring seats.
   
   
   

   

   Fig. Exploded view of the rear spring assembly

To install:

NOTE

Use new self-locking nuts for assembly.

1. Place the coil spring and spring seats on the lower control arm and raise into position. Tighten the inboard bolt to 61 ft. lbs. and the outer bolt to 54 ft. lbs. (74 Nm).
2. Install or connect the following:
   
   
   Rear wheel

This details will help.
Thanks.

FOR MORE HELP GO TO:----

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html